April 17, 2022
Description
Another mount to attach the BLTouch to the side of the Hemera. Offset to tip is X-33mm Y-0mm. No supports needed and should be printed in something with a higher heat tolerance like ABS. The top mount hole has a piece that can be broken off to allow it to be mounted over something else mounted in the top hole. Offsets is 2mm. You will need a 6mm and an 8mm M3 bolt and 2 M3 inserts.
11/29/20 added a slightly modified version with STP file.
Category: 3D Printer PartsLicense:
Creative Commons — Attribution
7
warpster
