April 17, 2022
Description
PanelDue 5i case with usable SD card access.
Uses 7 M3 4mm x 3mm inserts and M3 bolts (4-18mm and 2 6mm) or longer M3 bolts (4- 22mm and 2 8mm) and nuts.
Many people say a 30cm cable is the longest you can use reliably with the SD readers but I made a 40cm cable and wrapped it in duct tape (the metal stuff they use to seal furnace ducts) and it has worked fine for years on several displays....
Supports are needed for the SD card slot opening but nowhere else/ I printed it with PLA since it isn't subjected to high heat.
Category: 3D Printer PartsLicense:
Creative Commons — Attribution — Noncommercial
7
warpster
