Peopoly MOAI LED Lights

This is a set of files for adding interior LED lights to your MOAI printer. It includes 4 corner lights and a center light that operates only when the door is opened. The corner lights turn on independent of the printer or door. I mounted a switch in the interior of the printer but plan to replace the printer power switch with a double pull switch which will energize the lights when the printer is powered on with just the one switch. The center light is switched from an end stop switch that is triggered with the opening of the door. I used a standard end stop micro switch and super glued the included cap on the end of the arm where it rests against the door. Parts were sourced from Amazon...

I used a power suply that doubles as a heater supply but that one is 12.5 Amps and all you need for this is a small 1 Amp or so supply so get any of the adapters meant for LED lighting.

LEDs https://www.amazon.com/gp/product/B01N8XO4E3/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

Micro switch https://www.amazon.com/gp/product/B00E0JOP76/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Category: 3D Printer Accessories