May 26, 2026
Description
Should also fit the TS100, as far as I know they use the same tips. Untested with TS100.
The soldering iron holder is from AGT but it comes from many brands.
Hardware needed:
4x M3 heated insert (short)
4x M3x5mm screw. 6mm length might also work.
Has a printed spring inside, that holds the tip in place.
Print standing! No Supports, Brim reccomended. Like in the screenshot.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Technofrikus
