Coax Cable Stripper for Neutrik NBNC75BLP9

Custom 3D-printable coax cable stripping tool designed specifically for preparing cables for the Neutrik NBNC75BLP9 connector.

The tool uses 3 small blade segments broken off from a standard utility knife.
Each blade is positioned at a different depth to create the required cuts for the connector preparation.

Designed cutting depths are optimized for:

• Sommer Cable Vector 0.8/3.7 sw

• Neutrik NBNC75BLP9

To use:

• Insert the cable

• Rotate the tool or the cable

• The blades cut around the cable at the preset depths

Hardware Required

• 1× M4x40 countersunk screw (Senkkopf)

• 2× M4x30 screws

• 3× M4 nuts

Blade Installation

The blades are clamped into the printed parts.
If the blades are not held tightly enough, you can place a small piece of tape behind the blade to improve clamping.

For crimping the connector, I can recommend:

• T3698A BNC coaxial crimping tool

CAD Model

https://cad.onshape.com/documents/e04d81822cdf9471a0441295/w/790f8ea5f38a9003ac0be2a5/e/d8bc352d0c877e302ab29c65?renderMode=0&uiState=6a15f08851c70b1129b0dbdb