November 3, 2024
Description
I made this for my needs, because I'm using my own side spool holder.
Just unscrew the nut enough to glide the piece so the notch fits on screw's axis, then re-tighten.
v2 : slight rework of the torus ring in order to enhance bed adhesion.
| Recommended settings | \_/ Ø 0.4 | |
| Layer height | 0.25 | |
| Perimeters | 2 | |
| Infill | 20% | |
| Bottom & Top | 4 | 4 |
| Supports |
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Zendama
