June 5, 2026
Description
The Best Universal Filament Clip V1.2 – Stop the Tangle!
Tired of loose filament ends unwinding, creating hidden tangles, or snapping off on the spool rim? Meet the ultimate solution for spool management. This clip was engineered from the ground up to be ultra-secure, completely universal, and incredibly quick to print. No more struggling with clips that snap after three uses.
Why This Is The Last Filament Clip You’ll Ever Print
No Threading Required: Just push the filament into the side slot with your thumb and it locks tight.
Truly Universal Fit: Works flawlessly across almost every major brand—Bambu Lab (plastic & cardboard spools), Sunlu, eSun, Polymaker, Overture, and more.
Built to Last: Reinforced stress points mean it can bend repeatedly without snapping.
For the absolute best results, please use the "Simple Filament Clip V1.2" File
Setting | Recommended Value |
Layer Height | 0.16mm or 0.2mm (Standard) |
Walls / Perimeters | 2 walls (for maximum spring durability) |
Infill | 5% - 10% |
Supports / Brims | NONE (Print and go!) |
Best Materials | PETG / ABS / ASA (Best long-term spring retention) PLA works too, but may be more brittle |
⚠ Standard AMS Note: This clip is designed for tidy storage, external spool holders, and the AMS Lite. Because it hugs the outer rim, it may cause clearance issues on the internal rollers of a standard, closed AMS unit if left attached during a print. Remove before loading into the AMS!
🚀 Show Your Support!
If this clip saves you from a single failed print or tangled nightmare, please consider:
Giving it a ⭐⭐⭐⭐⭐ rating.
Uploading a photo of your print.
License:
Creative Commons — Public Domain
7
Little Pine Prints
