QIDI Q2 feet

## Features

• Perfect Match: Designed from scratch to fit precisely over the stock QIDI Q2 feet geometry.

• Extra Clearance: Raises the printer from the surface to about 19mm, accommodating the short height of the original feet.

• Snug Slip-On Fit: Slides directly onto the existing feet without the need for extra hardware, screws, or glue.

## Recommended Print Settings

To ensure the extensions are durable and fit securely, the following settings are recommended:

• Material: TPU (Highly recommended for a snug, grippy fit, amortization and durable structure).

• Infill: 20% - 30% (Gyroid or Grid for uniform support under the printer's weight).

• Perimeters/Walls: 3 - 4.

• Supports: None

## Feedback & Makes

If you print this model, please consider sharing a make and posting a photo of your setup! Your feedback helps improve future designs.