GM G-Body bucket seat/console foldable cup holder

This foldable cupholder is intended to be mounted inside of the center console of a 1978-1987 G-Body car with bucket seats.  It won't fit your big gulp.  Think soda can or small coffee.

It has been so long since I printed it, I do not remember which size heat set inserts/screws I used.  It's one of M2, M2,5 or M3.  If you print it, things should become obvious.

I used velcro to mount the cup holder rather than trying to screw it down and risk destroying my console.  Works really well.

Part 4 is meant to be super glued to the back that will be mounted to the console so that it sits straight relative to the ground.  It compensates for the fact that the inside console wall has a slight curvature.

I always recommend ABS for anything that's going in a moving vehicle that gets hot inside.