Hanboost S2 Rotary Tool Toolbox — Magnetic Closure, Hinged, Fits Original Accessories Box

A custom toolbox designed specifically for the Hanboost S2 rotary tool. Holds the tool with cap attached, includes the original Hanboost accessories box in its own slot, and has an extra compartment for additional bits and accessories.

Designed to be functional without unnecessary bulk. The exterior is intentionally minimal — the only detail is a subtle groove along the top edge to distinguish top from bottom without breaking the clean aesthetic.

Closure: 4 pairs of 10x3mm circular magnets (2 pairs minimum, 4 pairs maximum). Magnets must be glued in — without adhesive they will pull themselves out when the box is opened.

Hardware Required:

• 2x M3 16mm screws

• 2x M3 hexagonal nuts (ISO 7380)

Print Settings:

• Material: PETG or ABS recommended — PETG or ABS recommended for better impact and stress resistance, particularly at the hinge. PLA will work but is more prone to cracking over time with regular use.

• Walls: 3

• Infill: 20%

• Supports: No

• Layer height: 0.2mm

Notes: The original Hanboost accessories box fits its slot even when the toolbox is open.