Crossbar holder for hurdles

Crossbar holder that is put on a 2cm diameter wooden pole (height can be adjusted by sliding) and holds a crossbar for jumping over it.

Goes together with the hurdle stand:

You would need to print both the stand and the crossbar holder twice, for the left and right side and you need 2 to 4 2cm wooden poles (cylindrical). The bottom horizontal pole is optional. The top can be a wooden pole or something softer.

Ideally printed with PETG but PLA should also work. Needs brim for better adhesion of the protruding parts. There is a rather big overhang which probably wouldn't print totally cleanly but is usable even without supports.