November 3, 2024
Description
I ordered some on aliexpress, but they are too loose and thin, still dropped while driving. This design doesn't require supports, but you shouldn't print it at over 0.15 mm / 40 mms.
| Recommended settings | \_/ Ø 0.4 | |
| Layer height | 0.1 | |
| Perimeters | 2 | |
| Infill | 20% | |
| Bottom & Top | 5 | 5 |
| Supports |
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
Zendama
