shoe rack, mini, fas to print

Use these shoe stands to dry, ventilate, or simply store your shoes. I recommend printing them in PETG with a 15-25% infill, a nozzle temperature of 250°C, and a print bed at 90°C. Always consult the filament manufacturer's instructions (I printed with E-Sun PETG filament). Use a layer height of 0.16mm to 0.3mm. 0.3mm will print faster and will take about 1 hour.

As you can see there are two different types of supports so you can print the best type for your shoes.

One of the two shoe rack has a little hole, so it's easier to hang it.