Warhammer 40k 11th edition ruler

This foldable ruler is designed to quickly be able to measure the most common distances you run into when playing Warhammer 40K 11th Edition with just one tool.

• 2" - Engagement range / unit coherency

• 3" - pile-in / consolidate

• 5" - overrun fight / typical movement for Terminators, Gravis-models etc.

• 6" - ingress moves from battlefiel edge / typical Space Marine movement

• 8" - ingress moves from deep-strike

• 9" - unit coherency

Basically, the tool consists of 1"x1" squares, every one of the "notches" marks 1" distance.

(1" 4" and 12"  dont realy find a use case but can technically be measured. These are more of an accident than a feature and i only found out while testing.)

I also left enough room for you to add Logos as you need. 

Settings:

Layerhight 0,2mm, 3 perimeters, 25% infill. Supports: Tree, automatic (the 6 notches on the hinges of the bottom part need to be supported, thats what the holes in the bottom are for)

Change filament at 1.8mm for multicolor prints.

Tolerances on the "hinges" are realy snug to keep the parts from flopping around so the parts need some force to assemble.

This ruler is developed from this one: https://www.printables.com/model/1423098-warhammer-40k-combi-guage/files