June 14, 2026
Description
When you use a gantry with rails on the inside of the Y extrusion the space on the bottom is available for something nicer. More (performance) toolheads are being designed without the use of nozzle LEDs. Mount your Daylight, Daylight XXL, Rainbow or Rainbow XXL under the gantry and have a better view of those layers being printed!
The design is angled 5 degrees downwards to point a bit better towards the middle of your build plate. Baffles makes it less blinding without diffusing your lights. First mount the mounts to the extrusion, then mount the LEDs with the baffles to the mount (the LEDs are sandwiched in between the baffles and the mounts).
WARNING: These are designed around the original design from Blamm. Make sure that you use those since other designs with different spacing of LEDs won't fit this design!
BOM:
2x M3x10 BHCS/SHCS (Mounting the baffles to the mounts with the LEDs in between)
2x M3x10 SHCS/BHCS (Mounting it to the gantry)
2x M3x5x4 (Stock Voron) heat inserts (Insert from the back of the mounts
2x M3 T-nuts/Roll-in nuts
Note: I don't have a STEP file or something like that. STL's is the best I can provide but feel free to remix
License:
GNU General Public License v3.0
7
Roed
