Concrete cylindric planter mold

Reusable 3D printable mold for casting cylindric concrete planters.

The mold features a removable side-wall system for easier demolding and can be reused multiple times when properly maintained. Suitable for concrete, cement, plaster, and other casting materials.

If you enjoy this model and would like to support my work, or if you plan to use it for commercial purposes, please consider purchasing it on Cults3D.

https://cults3d.com/es/modelo-3d/casa/concrete-cylindric-planter-mold

Printing Parameters

• No supports required

• Recommended materials: PETG, ABS, or ASA

• Use high wall count and high infill for maximum durability

• Print all parts with the provided orientation

Usage

Before pouring concrete, apply a thin layer of oil to the inside surfaces of the mold. Regular cooking oil works well and helps release the planter after curing.

For best results:

• Vibrate or tap the mold gently to remove trapped air bubbles.

• Allow the concrete to cure sufficiently before demolding.

• Clean the mold after each use to extend its lifespan.

Etiquetas