June 3, 2026
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 100x179.08mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.32mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#00358e PLA BambuLab Basic Blue Transmission Distance: 4
#ff6a13 PLA Bambulab Orange Transmission Distance: 5.6
#0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5
#fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #12 (1.04mm) swap to Orange
At layer #18 (1.52mm) swap to Cyan
At layer #20 (1.68mm) swap to Sunflower Yellow
At layer #24 (2mm) swap to Jade White for the rest.
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
Xeyos
