Synology DS2XX+ Faceplate - Inspired by Master Chief

Titled: Spaceman.

Pictured printed on Esun Magic PLA Dark Green. 

For the Visor, I used a plastic mesh screen that I painted gold. It is then held in place by the retainer part that can be glued on.  

For the Rubber Mounts, I printed these with TPU and used the same Dark Green PLA for the Cap Pieces, which fit right onto the faceplates pegs and can be glued down for security.

I recommend printing this lined up with the Y axis and standing up. Natural/Tree/Organic Supports Touching Buildplate Only. Use a wide brim for stability.