November 3, 2024
Description
Wheel chock / Cale roue
I higly recommend the gyroid infill pattern with 20% infill at least. This needs to be strong. Don't try to stupidly save material with such an object, please ! Life is priceless !
With an average print speed of 50 mm/s, it can be done in about 24 hours.
V2 : better overhangs
| Recommended settings | \_/ Ø 0.4 | |
| Layer height | 0.25 | |
| Perimeters | 5 | |
| Infill | 20% | |
| Bottom & Top | 8 | 8 |
| Supports |
License:
Creative Commons — Attribution — Noncommercial — Share Alike
6
Zendama
