Refoss EM16 Antenna Bracket

I have a Refoss EM16 energy monitor. My breaker panel is set inside the wall, so I can't stick the antenna into a knockout hole on the side of the panel. I designed this bracket so I can mount the antenna to the wall next to the panel.

The hole in the top is 3/4" (19mm) which is a nice snug fit for the rubber grommet on the antenna. I also added clips to the bottom to hold the wire close to the wall.

There are 3 versions. There is one for machine screws, one for countersunk screws, and one with no holes for double sided tape.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

Supports:

Resolution:

Infill:

Category: Electronics