Heltec Mesh Node T096 / Heltec Wireless Tracker V2 case for lipo battery and external antenna

I've included two lids, one with the design in the photo, and a blank one.

I've also included two battery compartments. One for the EEMB battery (link below) and a bigger compartment 37x57x11 if you have something else that fits.

What you'll need:

A lipo battery LP103454 (I used one from EEMB, available on Amazon and Aliexpress) https://www.aliexpress.com/item/10000043885157.html

4x M3 6mm screws. The inset holes are 6.2mm for the screw heads.

4x M2.5 5mm screws. The inset holes are 5mm for the screw heads.

1x external antenna with a small diameter base (max 12mm)

Once you've assembled it, make sure the antenna is connected before you connect the battery!