April 19, 2022
Description
Behold the Holy Mushroom! This is the result of being stuck in a 3-hour webinar on a topic that has nothing to do with my job. I was feeling creative, and a bit artsy, so I started playing around with the form tool in Fusion 360. The result is a mushroom full of holes, much like my knowledge gained from this boring webinar.
If you print this, please share your results as I would love to see how it turned out. Bonus points for using a silk PLA in a rainbow gradient color! For best results print upside down with “Snug” supports as seen in the image from Prusa Slicer.
Remix Culture Approved! - To aid in remixes from the community I have added the design files in all of the relevant formats for you to download.
Design File Included: .stl .f3d, .ipt, step, .skp and obj files.
*Note: This post contains Amazon Affiliate links that support The Makers Workbench via a small commission from any sales they help generate.
Follow The Makers Workbench on:
Print Settings
I have only tested this model using the default 0.35mm Fast preset in Prusa Slic3r 2.4.1 with the following amendments made.
Support Settings - Note: See image for proper printing orientation
PLA Used: Polymaker PLA - https://amzn.to/3uF9Soo
License:
Creative Commons — Attribution — Share Alike
TheMakersWorkbench
