M5 press-fit screw and nut for Articulating Raspberry Pi Camera Mount, Remix

Here are the knurled cap for the screw and the smooth cap for the nut.
So I could see where the nut and the screw is.
I added "Hanging Holes", so it's now supportless.
There are some Parameter in VarSet.
But the only one that you really need is the Parameter Hex Lenght,
this change the deep from nut and the hexhead.
I testet it from 4mm to 5mm, in 0,2mm steps.

This is made for a 0,2mm layer, if you print with e.g. 0,15mm, change the
parameter in "Layer High".

Made with:
Filament: PETG
Nozzle: 0,4mm
Layer: 0,2mm
Infill: Gyroid 15%
Support: No
FreeCAD: 1.1.1
PrusaSlicer: 2.9.5
Printer: Prusa MK4S

The Photos are made with a M5 x 22mm and a "Hex Lenght" with 4mm.