GDMK - Big Knob (pi pico)

Got board and decided to try coding some circuitpython. This apparently should work on most operating systems. Was essentially coded to work on mac.... i need to do a few more lil tweaks on the 3d model and yesy pi pico is a bit of an overkill lol 

Erm, you will need to cut a bit of the print to allow the usb to be inserted. I did it this was as a temporary situation so that it does not put pressure on the pico usb socket. 

The provided STL files are my first useable itirations, these will change very soon to a better design. I've run out of budget pla to test with at the mo! ;)

Show me your builds, if enough people like this i'll have this project added to my discord.

Code & basic instruction: 

https://github.com/teqherself/Big-Knob-PI-Pico---volume-single-mode-CIRCUITPY-10

Pi Pico 2:

https://www.amazon.co.uk/Raspberry-Pi-SC1631-Pico-2/dp/B0DCKH85WR