Tapo C200C Wall Mount Bracket — 45° Cable Management, Indoor & Outdoor | No Extra Hardware Needed

A clean wall mount bracket for the Tapo C200C camera, designed to hold the camera at a 45° angle to keep the cable naturally out of the way. Mounts using the original hardware included with the camera — no extra purchases required.

Compatible with other Tapo cameras too — if you try it with a different model, let me know in the comments and I'll update the compatibility list.

Mounting: Uses original Tapo screws or any similar size screw. Can be mounted upright or flipped upside down. Mirror the model in your slicer to reverse cable orientation.

Print Settings:

• Material: PLA for indoor use. PETG or ASA strongly recommended for outdoor installation

• Walls: 3

• Infill: 20%

• Supports: Yes — required for camera pegs

• Layer height: 0.2mm

Notes: The Tapo C200C is a pan-tilt camera so the 45° mount angle doesn't limit coverage. The cable orientation can be reversed by mirroring the STL in your slicer before printing.