Japandi Table Lamp - Pleated Shade with Textured Tactile Base

This compact table lamp combines a clean, pleated cylindrical shade with a densely textured base featuring a raised diamond pattern. The sharp vertical folds softly diffuse the light, while the base's tactile, wavy lattice creates a striking interplay of shadows. It is a straightforward, functional piece focused on the contrast between neat geometric lines and a complex woven-like surface. It works perfectly as a bedside lamp, a shelf accent, or an elegant desk light, drawing inspiration from modern Japandi, Wabi-Sabi, and Nordic design.

Get a commercial license to sell physical prints and access premium lamp files on my Patreon. If you enjoy my free designs and want to support my work so I can create more, you can do that there as well.

PRINTING & ASSEMBLY
• Print-ready and tested.
• Support-free design.
• Fits standard E26/E27 sockets (hole diameter 41 mm; can be used as a replacement shade for most home table or pendant lamps) and standard E14 socket with adapter (included in files; hole diameter: 28 mm).
• Supports printing with PLA, PETG and other standard filaments.
• Assembles easily without glue or screws.

PRINT SETTINGS (recommended):
• Shade: VASE MODE (spiralize outer contour), layer height 0.2 mm, layer width 0.6 mm (I use nozzle 0.4 mm with extrusion width 0.6 mm), top layers 0, bottom layers 6.
• Base and Shade Topper: standard mode, layer height 0.2 mm, layer width 0.4 mm, infill 15% (you can use from 5% but the base will feel lighter and less solid), top layers 5, bottom layers 5, 2-3 outer walls (perimeters).
• No supports needed.
• All STL, 3MF files are already oriented properly (base should be printed upside-down).

MODULAR SYSTEM
Mix and match filament colors, or pair this model from the UNI series with other interchangeable bases and shades from the UNI or AIR series available in my profile. AIR shades fit AIR bases directly, and they also fit UNI bases or  most home lamps using the included adapter (UNI shades do not fit AIR bases). Follow my page for regular modular design updates. 

DIMENSIONS
• Shade: height: 160 mm (6.3 in), width: 170 mm (6.7 in)
• Base: height: 120 mm (4.7 in), width: 77 mm (3 in)

PRINT TIME
Depends on printer and print settings. For standard settings on a Bambu Lab A1:
• Shade: ~2h 40m
• Shade Topper: ~50m
• Base: ~4h 25m

WEIGHT
Depends on printing settings. Using the recommended settings:  shade ~90 g, shade topper  ~20g, base ~120 g.

Use LED bulb ONLY!

A lamp cord with E26/E27 or E14 socket is required (not included). Search "plug in lamp cord kit E26" or "plug in lamp cord kit E14" on Amazon or your local hardware/lighting store.
•• For personal use ONLY. Resale of files or printed objects is not permitted.••

Any questions? Feel free to ask!
Visit my profile & follow for more designs — new models added regularly!