bigclivelive foamy whoofler

foamy whoofler that big Clive uses on his live streams it is in openscad

https://www.youtube.com/channel/UClIzWmVzGPm2zhNT2XZ-Rkw

//MR WHOOFLER FIRE FOAM MAKER
//DO NOT EVER MAKE ONE OF THESE
$fn=100;
difference(){
union(){
difference(){
union(){
//first additions
//finger rim
translate([0,0,0])
cylinder(h=3,d1=45,d2=45);
//base
translate([0,0,3])
cylinder(h=20,d1=30,d2=15);
//upper cone
translate([0,0,23])
cylinder(h=40,d1=15,d2=50);
//upper rim
translate([0,0,63])
cylinder(h=10,d1=50,d2=50);
}
//first subtractions
//inner foam cone
translate([0,0,25])
cylinder(h=38,d1=15,d2=48);
//inner base
translate([0,0,-1])
cylinder(h=23,d1=30,d2=12);
//upper rim
translate([0,0,63])
cylinder(h=11,d1=48,d2=48);
}
//second additions
//injector base
translate([0,0,0])
cylinder(h=23,d1=12,d2=12);
//diffuser cone
translate([0,0,25])
cylinder(h=10,d1=15,d2=0);
}
//second subtractions
//twelve radial vents
translate([0,0,25])
for (i=[0:30:330])rotate([65, 0, i]){
cylinder(h=8, d1=1, d2=1);
}
//diffuser cone inner
translate([0,0,24])
cylinder(h=10,d1=14,d2=0);
//4mm injector entrance
translate([0,0,-1])
cylinder(h=4,d1=4,d2=4);
//tapered transition
translate([0,0,3])
cylinder(h=5,d1=4,d2=3);
//seal taper
translate([0,0,8])
cylinder(h=5,d1=3,d2=2.8);
//tapered transition
translate([0,0,13])
cylinder(h=1,d1=2.8,d2=1);
//gas feed pipe
translate([0,0,12])
cylinder(h=15,d1=1,d2=1);
//x-ray box
//translate([-30,-30,-1])
//cube([60,30,100]);
}