Snap Close Connecter V2.0

First of all, my respect to the original designer of the Snap Close Connector "electrosync".
I was very enthusiastic about the idea but had immediately a few improvements in mind that I noticed in the original design.

Advantages:

• No paper clip is needed to bend a spring
• There are also No washers needed

I have also redesigned the original 3D models and made some design changes. 

Among other things, the screws heads are now hidden and standard M3x15 hexagon screws can be used. Most of us have those in the spare part bag 😉

Material

• 4 screws M3 x 15 mm or M3 x 12 If you use the Part4 No Nuts Version
• 4 hexagon nuts M3 (Optional)

You like my Work? 

Support my efforts and push the like  ❤️

Make my day and post yout Makes 🤗

Assembly Instructions

Do real MAKERS need a description !? 😉
First insert the M3 screws in Part 1 ( Maybe the holes have to be re-drilled with a 3mm drill bit) then put the nuts in the recesses Part 4 (If you use the Version with Nuts). Now assemble the parts in the given order and dont forget the spring! Then screw the parts together, DON'T OVERTIGHT done!

Print instructions

Simple print

No support needed

PLA and PETG gives a very good results on 0.20mm, 15 % Infill and 2 Parameters of course with original Prusament! 👍🏻

Happy Printing!!! 👋🏻