Core One Heat Bed Tray and Nozzle Wiper for Cryogrip / Heizbettablage und Düsenreiniger für Cryogrip

Heatbed Tray and Nozzle Wiper for Cryogrip

There are many different trays for the print chamber, and I’ve even designed a few myself. Since I now want to use the Cryogrip Pro Glacier build plate, I can no longer use my old mount. That’s why I designed this one. The requirements were:

1. Moves upward along with the heated bed

2. Compatible with the Cryogrip Pro Glacier

3. The lower inner edges of the tray are rounded

Actually, I would have preferred the wiper on the right side, where the extruder’s home position is. But during a test, I noticed that the print head collides with the wiper when printing the purge line. Therefore, cleaning is done on the left.

Printed in PETG, 0.2 mm layer height, support structures required

Requires 2 M3x8 or M3x10 screws; the 3MF file includes the support structures as well as an M600 command to change the color if needed.

I generated the required code using the following tool: https://wiper-pathgen.6d6178.com

The provided G-code works for me. Use at your own risk. Replace the code G29 P9 X208 Y-2.5 W32 H4 in the “Custom G-code” section of the printer settings in the slicer.

Have fun!