Skadis mount for Sodola SL902-SWTGW124AS switch (upside down)

This is yet another mount for a Sodola SL902-SWTGW124AS switch to bolt it onto an Ikea Skadis board. Compared to my other one, this one mounts the switch upside down onto the board which makes seeing the LEDs much easier when the switch is fully populated with cables. It takes more filament and more time to print, though.

You need two M3x8 countersunk screws to mount the parts to the bottom of the switch. You also need these T-nuts to screw the holder to the board.