Hygrometer Thermometer Mount for Anycubic Kobra S1 Door

Summary

This is a Hygrometer / Thermometer Mount for the door of a Anycubic Kobra S1. You can mount cheap round meters from Amazon, AliExpress, etc.

No additional screws are needed - use the existing ones!

Versions

You will find two versions: 30° rotated and straight. Some round Hygrometer / Thermometer have offset brackets. Please check your meter and then choose the right version.

Print

• Layer Height: 0.2mm

• Perimeters / Walls: 3 walls

• Top/Bottom Layers: 5 layers

• Top / Bottom pattern: concentric

• Infill: 15%

Assembly

1. Install your round meter in the printed mount - just clip it in!

2. Unscew the existing screws from the door handle and keep them

3. Attach the mount and use the existing screws to tighten all together.

Do you like my work?

Each model is a handcrafted composition for fast, easy and stunning multicolor printing. Please download and have a lot of fun! I would like to ask for a like, share and follow :-)

You want to make money with my work?

Have a look here: Patreon (work in progress) / Printables Club