20mm Tube Holder Stand (150mm single core cable reels)

Intended to be a holder for single core conduit cable reels for a desk or similar.

Print (at least) 2 to build the stand.

20mm, 20.5mm or 21mm hole designed for 20mm tube (or bar). Depends on your printing tolerance/materials.

In my test, printed in PETG, using https://www.screwfix.com/p/essentials-black-tube-1m-x-20mm/990cp 20mm was too tight, 21mm was too loose... Hence the 20.5mm too.

Plastic tube may be ok depending on weight of cable/number of reels you want; otherwise steel probably advisable. Wood too, will probably work...

In my print, the 20mm hole was a very tight fit, so if you want to be able to remove it again easily, probably use the 21mm model...

20mm, 20.5mm and 21mm rings printable pretty quickly to test the sizing with your tube (which will have tolerances), and the material/your printer (which also has tolerances).

Should be the right size to have 150mm width drum of cable; for example 100M of 1.5mm single core cable.

Lazily modified version of https://www.printables.com/model/203977-din-rail-stand by https://www.printables.com/@Nakapan in Fusion.

Original print instructions:

• layer height: 0,2 mm

• perimeters: 2

• infill: 15% (gyroid pattern)