Upgraded Parts for MCARRO MC062 Drift RC Car

📁The 3mf file is for Bambu Studio.

Custom Steering Wheel Upgrades

• The steering wheel on the MCARRO MC062 drift RC car transmitter is quite stiff, which can negatively affect maneuverability.

• To improve handling, I have created two types of large-diameter steering wheels that can be retrofitted directly.

• If the fit is loose, please apply some tape to serve as a shim for adjustment.

Throttle Limiter Parts

• Since the car’s speed is often too high for dedicated drift circuits, I have developed speed-limiting parts.

• These are available in three sizes that allow for adjustments in 0.5mm increments.

• The Spring Type allows for further acceleration by pressing down harder on the throttle.

• Please refer to the images and videos on this page and attach the parts using double-sided tape.

Feel free to support me at:
https://buymeacoffee.com/andcraft3d

Detailed video with instructions and demo:

Print settings reference: 

• All parts can be 3D printed without supports on FDM 3D printers.

• layer height 0.2 mm

📌 Notes:

• The throttle limiter parts are intended for use on high-slip, dedicated drift circuits. 

• Depending on the precision of the 3D print, there is a possibility of minor scratches occurring on the main unit during installation.

• The MC061 and MC0811 transmitters have not been tested for compatibility.

• Due to changes in product specifications, this part may not be usable.

⚠ License note:

• This model is provided for personal, non-commercial use only.