June 17, 2026
Description
The wedge mount that comes with the Unifi G6 Entry was too shallow. Modeled a wedge mount based on the original to provide more tilt. The one in the pictures is a 40-degree tilt.
Have uploaded a 30 and 40 degree version
Printed with 0.4mm nozzle at 0.15mm layer height. Used PETG-CF for outdoor use and dimensional stability. Depending on plastic shrinkage, can scale by 100.1-100.2
Requires 2 M3 heatset inserts. The original screws should work but I used some low-profile socket screws since I had them lying around.
License:
Creative Commons — Attribution
9
4nthonylin
