April 21, 2022
Description
This is a spool holder designed to attach to commonly available wire shelving. They mount to the underside of a shelf, allowing them to be placed below a Prusa Mini, or above for MK3/S/+, or other printers that feed from the top. It's also possible to mount it on the top side of the shelf if your configuration permits.
The holders themselves have a protrusion which goes inside the spool, and the nuts thread on, capturing one of the wires in the channel in each threaded portion.
Spool holder: PETG 0.3 layer height
Nut: PETG 0.2 layer height.
No supports required.
License:
Creative Commons — Attribution
7
Dustin Hartsfield
