U-Lock Holder for Ninebot G30LD e-scooter

Update03:
Added Bracket for heat inserts M3x4x5mm.

Update02:
Added bottom hook for U-LOCK - ULTRA COMBO 245/153C.

Update01:
Addetd top hook for 25mm thick shackles with inner Diameter 100mm.

Since theft protection is an important issue for e-scooter owners, I decided to use a U-lock.
This cannot be quickly cut with a bolt cutter or pliers.
Unfortunately, the holder supplied was not suitable for the egg-shaped cross-section of the handlebar.
I therefore took the trouble to construct a suitable holder that fits perfectly to the vertical handlebar.

Dimensions of the U-lock:
Bar thickness: max. 15mm
Shackle width: min. 65mm
Thickness of lock bar: max. 37mm

Required mounting material:
8 pieces M3 nuts
8 pieces M3x16 cylinder head screws

Print data:
0.3mm layer height (or less)
Vertical shell, 3x permimeters (or more)
Infill 50% 

Optional to increase stability
Cylindrical 100% Infill modifier around the screw holes (seee Pictures).

Have fun! Do not hasitate to ask questions.