June 20, 2026
Description
This model is a cable clip for Grado headphones. It is fitted around the Y splitter on the cable. The clip rotates 360 degrees and uses the spring from a standard wooden clothes peg.
No supports. Some assembly required.
Instructions:
Print all 4 model-files, PETG is prefered: Base, cap, clip and cliptop. Both clip-parts should be printed on their sides.
The Clip slides in to the slots of the Cap. It's a tight fit and will require some force.
Disassemble a wooden clothes peg to obtain the required spring. Pay attention to the disassembly. The spring is added to the Clip in the same way it was to the peg.
The Cap snaps on to the Base. Again, it's a tight fit so it will require some force.
License:
Creative Commons — Attribution — Noncommercial
Kamil Metze
