Gridfinity 1×1 Bin — Magnet Holes + Finger Scoop | Small Parts Organizer, No Supports

A dedicated home for all the tiny things.

This single-cell 1×1 bin is the most-used size in any Gridfinity collection. The built-in scoop lets you sweep small parts out with a fingertip, and the four magnet holes keep it locked to a magnetic baseplate when you yank a drawer open.

Mix a handful of these with larger bins on a baseplate to build exactly the organizer your drawer needs.

### Features

- 📐 True 42 mm Gridfinity — drops into any standard baseplate

- 👍 Finger scoop — easy one-finger access to small parts

- 🧲 4 magnet holes (Ø6.5 × 2.4 mm) for Ø6 × 2 mm magnets

- 🪣 35 mm tall — handy depth without wasting filament

- 🖨 Prints flat & support-free

### Perfect for

Screws & nuts · SD/microSD cards · resistors & SMD parts · beads & findings · pills/vitamins · earbuds · erasers, clips, dice

---

## PRINT SETTINGS

- Material: PLA or PETG

- Layer height: 0.20 mm

- Walls / perimeters: 3

- Infill: 10–15 %

- **Supports:** None

- Orientation: As exported — open top up, feet down

- Print time: ~35–50 min · ~12 g

Tip: Print a whole batch — you'll always want more 1×1s. Pair with the Gridfinity Baseplate 2×2 in this pack.