Gridfinity Bit Holder 1×2 — 21× 1/4" Hex Driver Bits | Magnetic, Baseplate Compatible

Every bit in its place, right where your drill is.

If you've got a drawer of loose driver bits, this fixes it. The holder has a 7 × 3 grid of 21 sockets sized for standard 1/4" hex bits — slide them in and they stand upright so you can grab the one you need at a glance. It's a Gridfinity module, so it locks into your baseplate next to your other bins and tools.

### Features

- 🔩 21 sockets for 1/4" (6.35 mm) hex driver/insert bits

- 📐 True 42 mm Gridfinity 1×2 — drops into any baseplate

- 🧲 8 magnet holes (Ø6.5 × 2.4 mm) for a locked-down hold

- 🛠 Bits stay upright & visible — fast grab-and-go

- 🖨 Prints flat & support-free

### Perfect for

Drill/impact driver insert bits · screwdriver bit sets · precision/electronics bits (snug-ish; scale holes if needed) · workshop & toolbox organization

---

## PRINT SETTINGS

- Material: PLA or PETG (PETG for workshop durability)

- Layer height: 0.20 mm

- Walls / perimeters: 3

- Infill: 15–20 %

- **Supports:** None

- Orientation: As exported — sockets facing up, feet down

- Print time: ~1.5–2 h · ~35 g

Fit tip: Sockets are Ø7 mm for an easy drop-in fit on 1/4" (6.35 mm) hex bits. If your bits are tight or loose, scale the model ±2 % in your slicer.