Oval cabinet door hooks for silicone bowl/pot lids

I bought these silicone pot lids/food covers on Amazon (https://www.amazon.com/dp/B08BLWV57Z - nice to have around) and wanted a way to store them that wasn't stacked awkwardly on top of each other on a shelf. The hooks on them are basically ovoid, so I made a 1mm thick base and angled, tapered oval hook that they drop easily onto. I would assume this works for many other similar sets as well, so long as they have hanger holes.

Prints without supports. Attach to the inside of a cabinet door with VHB or similar doublestick tape. You could overlap the hooks and the lower side of the next lid a little if you don't mind them sticking out a little from the door. I did this with the biggest one to fit them all on one door.

For the set I own, scaling is as follows - scale in the slicer in X and Y only, leave Z alone.

S: 100%
M: 175%
L: 220%
XL: 250%
XXL: 300%

3MFs are set up accordingly, for an MK4S. F3D included if you want to tweak the design.