Motorola Moto E smartphone case

This slip-on smartphone case/cover is designed to fit the Motorola Moto E and has a waterfall hearts accent.  It is recommended that TPU98A be used to print the case because it offers stiffness and yet enough flexibility to easily slip onto the Moto E phone.  TPU95A may work fine also; however, I have not tested it. Ninjaflex is too flexible and will slip off of the phone.  PLA may be used only after some sanding of the inside edges of the case to make the case slip on more easily with such a stiff material.

Layer height used was 0.24mm with TPU98A running at 40mm/s on a Bowden configured Ender 3 Pro.