Moto/Bike Phone Mount Holder

3D printable phone mount for motorcycle and bicycle handlebars. 

Check out my app (drive safe): app

A newer V3 version is now available.

V3 is lighter, more compact, easier to adjust, and offers improved clearance and stability at higher speeds. I recommend downloading the latest version instead:

V3: https://www.printables.com/model/1787293-motobike-phone-mount-holder-v3

Handlebar mounting hole diameter: 22.5 mm
Internal phone cavity (usable space): 154 mm (H) × 76 mm (W)

Hardware required for assembly (not included in the STL):

- 3x M6 Threaded Inserts nut Inserts M6 x D9 x L8
- 2x M6 Thumb Screw 30–40 mm (optimal ~30 mm)
- 1x M6 Thumb Screw 10–50 mm (optimal ~10 mm)

Versions:

• V1 was the original version. I tested it on a bicycle and it held well. I also tested V1 on a motorcycle, but at higher speeds, if it was not tightened very firmly, it could start to tilt downward because of wind pressure.

• After that, I made V2. I tested V2 on both a bicycle and a motorcycle, and when tightened properly, it held its position well. So far, I have ridden about 300 km with V2 on a motorcycle, including speeds around 140–150 km/h, and I have not had any issues yet.

Please note: this is not a guarantee of safety or long-term durability. Use it at your own risk and make sure the mount is tightened securely before riding.

More from me: link