Cases for Adafruit QT Py and SHT45 sensor board

These are cases for an Adafruit QT Py board and a temperature sensor board like the Adafruit SHT45.

I designed them to be as small as possible, so that I can put them into my P1S 3D printer to get an accurate chamber temperature. But of course, you can use it anywhere ... maybe except outdoors :D

At the bottom are holes for 6x2mm magnets. The lids are clipped into the main part.

Since I use mine inside the 3D printer chamber, I printed them im ASA. If you use a similar filament, make sure to dial in the shrinkage factor correctly.

Print settings:

• 2 walls, inner/outer/inner

• 0.2mm layer height

• 15% Gyroid infill

• supports for the magnet holes