GBS-8200 Case with SCART & Wemos D1 Mini Wifi for GBSControl

GBS-8200 RGB to VGA Video Converter Board + SCART Case

Remix adding housing for a SCART plug. This is the PCB mounted right angle version which clips nicely into the housing with the pins exposed so these can be attached to the wires as required. Also added a 3.5mm jack connector hole which can be used for audio out.

Designed to house the Wemos D1 Mini to use with the customer firmware https://github.com/ramapcsx2/gbs-control

Cut-outs for all the connectors including micro USB for the D1 Mini (useful for firmware upgrades) and SCART and 3.5mm audio jack.

Use of SCART is ideal for a lot of retro computers & consoles that output RGB..

*added v2 which lowers the SCART by 0.5mm so it isn't so tight at the top meaning the lid shuts better. Also moved the 3.5mm stereo jack up giving it a bit more room making it easier to fit and rotate for securing.

**added an alternate version to accommodate a different SCART socket design. For the original version the SCART sockets had very short “ears” while the alternate version is for SCART socket with larger rounded “ears”. This alt type seems to be more common. For this version I also had to move the 3.5mm jack socket to the front panel as it wouldn't fit with the much larger socket.

SCART breakout board for alternate version available on eBay https://www.ebay.co.uk/usr/tom_dd

I've also uploaded the PCB to PCBWay SCART Breakout PCB. Useful for connecting SCART to the GBS-8200 and other Video convertor boards - Share Project - PCBWay