Vegvisir Viking rune coaster with holder (no supports, no MMU/AMS)

The design features deep-relief runes and the central Vegvisir symbol. the symbol is intended to help the bearer find their way through rough weather. Because of the uneven surface on these coasters, sweaty glasses will not stick to them when you lift them up.

Printing info:

The coasters are designed to be easily printed without MMU/AMS, with just one color swap. The first color will be the color of the symbols and runes (yellow/gold) in my showcase picture). The second color will be the area around (black in my showcase picture).

You need to use 0.20mm layer height (important!). The color change is already programmed into the provided 3mf file for PrusaSlicer and another one for Bambu Studio). If you download the stl or use another slicer, you can manually add a color change at layer 23 (4.6mm).

If you are going to use these for warm cups, you need to use PETG. If you are only going to use them for cold glasses and cups, you can use PLA. The holder can be printed in PLA regardless.

The holder is designed to hold six coasters. You can scale the height down by 5mm for each coaster, or up by 5mm for each if you print more than six.

I used 15% gyroid infill, and slowed the top solid infill/surface speed down to 50 mm/s.

(Optionally, you can print the coasters face down for a different surface finish. In that case, you add a color change at layer 4 (0.8mm).

Please check out some of my other models: