Knight Rider Stand 1:24 KITT

Stand mimicking the F.L.A.G. semi-truck for Jada 1 :24 K.I.T.T.

Wanted tit to look like inside of the semi-truck and a bit of functionality.  So you can lift up and down the doors with small stripes.

Basically no supports needed. BUT the doors need to print upright so the slide in stripes will fit in them.

I printed the cross structures, logo panel in 0,16 mm layer height and the rest in 0,2mm

The black cover parts are for decoration and not needed. Those have to be glued to the wall.

Other than the covers the model does not need any gluing but you can if you wish.

The parts are big and I have a 220mm plate so the long parts I did cut in orca slicer and used dovetail to connect them. In this model I did not want to cut them So you can decide what to do.

You can find reference images how I did cut mine and what layout worked good.

The text and logo you have to paint. Select the white color as main filament and paint the dark part to black.

Mine did print out in 12 hours wit two FlashForge printers.

Hope you enjoy this build.