No-Drill uPVC Sash Mount System *J-Hooks & Grippers* ~16-17mm

Last week s sudden heat wave, affected my plants growing in the attic, badly . Since curtain rods and blinds is impossible to be mounted on this window, I had to come up with a quick solution to protect them from the hot sun.

Those quick to print grippers saved the day '(the plants actually..)

NOTE

Tested on a standard uPVC window and balcony door. Compatibility depends on the sash profile and thickness.

If you try it on a different profile, let me know in the comments which dimensions worked. I'll gladly add more sizes if needed.

If you need a specific dimension, feel free to ask 

What to measure....

Uses

The J-Hooks (models A+B+E)

• Holiday & String Lights: Perfect for hanging Christmas or fairy lights

• Seasonal Wreaths & Garlands: Easily anchor lightweight seasonal decorations

• Cable & Blind Cord Management: Route loose cables or window blind pull-chords safely out of reach.

• Support Climbing Plants: Mount your plants loosely on the hooks

Hook A has an opening of 5,9 mm, Hook B of 4mm and Hook E has an opening of 8mm

The Fabric Pinch-Clips (Grippers C+D)

• DIY Sun Shades & Blackout Panels: Slide fabric, mesh, or temporary blackout cloth straight into the zigzag teeth to block out harsh sunlight.

• Custom Cafe Curtains: Create minimalistic screens by clamping the top hem of a lightweight curtain panel.

• Holiday Banners: Instantly secure fabric flags, party banners etc

Gripper A  for thin fabrics (~1mm), Gripper B is for thicker ones (min 1,8mm)

Print Instructions

• 0,2mm layer height, 0,4mm nozzle, 3 perimeters, 100% infill

• No supports needed 

• PETG recommended especially for outdoor use

• settings in the 3mf files 

• quality print ca 15-24minutes depending on the model