PIP Clog Sleigh Bell + Hi-hats charms

I ve always loved diy instruments! these clogs sound soooooooo good!

Print and placement Instructions

• Print with 0,4 nozzle, 0.2mm layer height, 4 perimeters

• Use the specific files for PETG or PLA (the tolerances are adjusted differently for each material).

• Using the provided .3mf files is highly recommended!

• Bells Once printed, place the pin in the hole with help of pliers.

• Snap the inside ball to break it. If the ball snaps before placing, be carefull not to lose it 

• Hi-Hats. Let them cool and separate the two cymbals.Use a blade if needed (normally it should seaparate easily).  Push the Pin all the way down until it snaps. Use a blade if needed (normally it should seaparate easily) 

• Note for Silk PLA: Because Silk PLA can behave differently and weld more easily, I have included the .3mf files with settings that successfully worked for me.

Have fun and keep the beat going!