July 3, 2026
Description
Makes the PCB Holder by far more rigid.
The main body was split in half to fit on print bed - first assemble it all, then weld the two printed parts together using soldering iron.
Requires 8x M4x20 SHCS bolts & nuts.
Another 8x if you wanna bolt the plastic part to the side of the sheet metal but that's entirely optional, requires drilling holes & its already plenty more rigid without those.
Printed with 0.8mm nozzle, 0.4mm layer height
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
R3NE07
