Fiskars pole saw PARTS

I needed a new rope pull and pole end cap for my Fiskars pole saw but didn't find them so I made my own.  The rope pull is based on the original Fiskars design that was comfortable for me to use. The pole is ovule shaped about 29mm x 42mm (1 1/8 x 1 5/8 inch). While the end cap was a good fit, it needed some silicone or GOOP to ensure it stayed on.

I used PLA (had PLA in the printer ) PETG may be better. 6 walls and 40% infill (my standard settings for items that will be stressed a bit)

I am including the RSDOC files incase someone needs to modify them for whatever.